Repeater and Gateway callsign invisible on dashboard

Forum for English only

Moderator: BM Administration

HA5OGR
Posts: 8
Joined: 16 Dec 2014, 20:43

Re: Repeater and Gateway callsign invisible on dashboard

Post by HA5OGR » 21 Dec 2014, 16:00

Hi Artem,

The problem was I gave same password for gateway like forum. In nodes list my callsign data is visible now but I have two pieces of ircddb. Now it is showing as you can see but after every PTT push the system duplicate my callsign and give an "anonynous". :(

Date/Time My Call Your Call Repeater Gateway Target Message Options Duration Errors RSSI
2014-12-21 13:35:47 Anonymous Group Call CQCQCQ HA5OGR C HA5OGR G XRF250 B 0.98 0.00%
2014-12-21 13:35:47 HA5OGR Group Call CQCQCQ XRF250 B Lajos near Budapest 0.98
2014-12-21 13:25:48 Anonymous Group Call CQCQCQ HA5OGR C HA5OGR G DCS012 V 0.98 0.00%
2014-12-21 13:25:47 HA5OGR Group Call CQCQCQ XRF250 B Lajos near Budapest 0.98
2014-12-21 13:25:23 Anonymous XRF250BL HA5OGR C HA5OGR G XRF250 B 0.98 0.00%

On XRF250 Reflector System Dashboard v1.14i Reflector 3.11 (R3ABM patch) everything is OK. :)

Linked Gateways
Module A Module B Module C Module D Module E
UB3ABM A HA5OGR C UB3ABM C UB3ABM D
ON9CFM C
R1ABC C
R2AEE B
R2DAN B
R2DAN C
R2DFR C
R5DK B
R5DK C
R6LAA B
RA1AIE B
RA1AIE C
RA3IX B
RK3FWD A
RT9K B
RU0LA C
RU3AWW A
RU3AWW B
RU3AWW C
RU3AWW D
RV3ADJ B
RX3AOI B
RX3DCZ B
RX3DVZ B
RZ3DHN C
SR250E A
SR250H B
UA1AAY C
UA3AHM B
UA3MLR B
UB1AAM B
UB1AAM C
UB3ABM B
US5EQQ B

Software Clients
Callsign Module Type
SR250D Listening HotSpot

Last Heard
Callsign Last TX on Source Date-Time MSK
HA5OGR XRF250 B HA5OGR C 2014-12-21 15:18:39
UA3MLR XRF250 B UA3MLR B 2014-12-21 13:45:13
RA3MAC XRF250 B UA3AHM B 2014-12-21 13:45:00
RX3DCZ XRF250 B R2AEE B 2014-12-21 13:40:42
R3BQ XRF250 B RU3AWW A 2014-12-21 12:50:44
UB3AGT XRF250 B RU3AWW A 2014-12-21 12:50:16
RD3FI XRF250 B RV3ADJ B 2014-12-21 11:33:35
R5ACQ XRF250 B RX3DVZ B 2014-12-21 11:13:25
RA3IX XRF250 B RA3IX B 2014-12-21 05:44:00
RZ3ARS XRF250 B RZ3ARS D 2014-12-21 01:58:55
R2DAN XRF250 B R2DAN B 2014-12-21 00:53:08
RK3AQG XRF250 B RV3ADJ B 2014-12-20 23:40:04
R3AAX XRF250 B R2AEE B 2014-12-20 23:07:00
RA1AQB XRF250 B R1ABC C 2014-12-20 21:48:19
RA1AIE XRF250 B RA1AIE B 2014-12-20 20:31:17
UB1AAM XRF250 B R1ABC C 2014-12-20 18:45:20
RL6MM XRF250 B R6LAA B 2014-12-20 18:05:57
RN3DLZ XRF250 B R2AEE B 2014-12-20 15:32:37
RN6LTB XRF250 B R6LAA B 2014-12-20 10:33:01
R3ABM XRF250 B SR250H B 2014-12-20 00:46:24
R6LAA XRF250 B R6LAA B 2014-12-19 22:59:38
RN3AUZ XRF250 B R2AEE B 2014-12-19 22:09:54
RX3AOI XRF250 B RX3AOI B 2014-12-19 18:52:44
UB1AGQ XRF250 B UA1AAY C 2014-12-19 17:58:48
UB3AFX XRF250 B R2AEE B 2014-12-19 16:36:16
RC7LL XRF250 B R6LAA B 2014-12-18 22:47:10
M0ZZM XRF250 B MB6IBK C 2014-12-18 21:00:34
US8CP XRF250 B UT2UU B 2014-12-18 20:06:59
UT2UU XRF250 B UT2UU B 2014-12-18 12:11:06
RV3ADJ XRF250 B RV3ADJ B 2014-12-17 22:56:56
R2AAAA XRF250 B SR250H B 2014-12-17 18:23:27
SP8QER XRF250 B SR8UWD B 2014-12-17 11:42:15
US5EQQ XRF250 B US5EQQ B 2014-12-16 22:53:04
R2AEE XRF250 B R2AEE B 2014-12-16 20:49:15
UR3PFK XRF250 B SR8UWD B 2014-12-16 20:14:54
SP8NTH XRF250 B SR8UWD B 2014-12-16 17:42:23
UZ5DX XRF250 B UR0DUA B 2014-12-16 15:59:37
RV3AGR XRF250 B SR250H B 2014-12-15 22:48:04
R5DK XRF250 B R5DK B 2014-12-15 13:51:24

User avatar
R3ABM
Posts: 3105
Joined: 08 Jun 2012, 07:43

Repeater and Gateway callsign invisible on dashboard

Post by R3ABM » 21 Dec 2014, 20:25

Our tracking system gets information from irccDDB and reflector at the same time. It is compares time and callsign and consolidates all data to single record. If difference of server and node time greater than few seconds or callsign not visible it can not consolidate call and put it into two records.

In your case callsign is not visible. You should set visibility to on at self-care (see My Callsign/Privacy) or from the station using next instruction - http://ircddb.net/live-vis.html
R3ABM / DL5ABM / ex. UB3ABM

HA5OGR
Posts: 8
Joined: 16 Dec 2014, 20:43

Re: Repeater and Gateway callsign invisible on dashboard

Post by HA5OGR » 21 Dec 2014, 22:14

You are right Artem. Time zone was setting in Raspberry pi to British time (London). I changed to Europe time zone (Budapest). Now system works correctly. :D Thank you very much for your help. You are a gentleman.

Date/Time My Call Your Call Repeater Gateway Target Message Options Duration Errors RSSI
2014-12-21 20:11:55 HA5OGR Group Call CQCQCQ HA5OGR C HA5OGR G XRF250 B Lajos near Budapest 0.98 0.00%
2014-12-21 20:09:19 RX6LBD/5100 Group Call CQCQCQ R6LAA B R6LAA G XRF250 B ALEXANDER RND 0.26 0.00%
2014-12-21 20:02:39 RA3IX/ID31 Group Call CQCQCQ RA3IX B RA3IX G XRF250 B Alexey in Tver 1.10 0.00%

Merry Christmas to you and your family.

Regards

Lajos

User avatar
R3ABM
Posts: 3105
Joined: 08 Jun 2012, 07:43

Re: Repeater and Gateway callsign invisible on dashboard

Post by R3ABM » 22 Dec 2014, 00:31

Thank you very much!
Congratulations and welcome to our network!
Merry Christmas!
R3ABM / DL5ABM / ex. UB3ABM

Post Reply

Return to “Common discussions”